Codan HF Whip3040 AntAuto PLD
Antennas & Masts HF Vehicular Antenna Tuners

3040 Automatic Whip

VEHICULAR HF ANTENNA

The 3040 Automatic Antenna Tuner is a low profile automatic tuning whip antenna rated for 125 W PEP across the 2 to 30 MHz band, tuning new frequencies in one second average for mobile HF voice and data.

Book a Demo

Mobile HF crews need channels ready without delay. The 3040 Automatic Antenna Tuner resolves new frequencies in one second on average and recalls memory tunes in under 150 ms. With unlimited memory capacity, 125 W PEP handling, and an integral active wideband receive amplifier, it supports fast scanning, reliable linking, and responsive voice and data operation across demanding mobile missions.

Vehicle radio systems should support the operator, not add workload. The 3040 is designed to work transparently with Codan HF transceivers, with integrated control for receiver scanning, data, Automatic Link Establishment, 2G and 3G ALE, and Frequency Hopping. Whip options support both long-range HF coverage and short-range NVIS profiles, giving crews flexibility across changing terrain and mission needs.

Vehicle-mounted HF systems face vibration, dust, water, heat, and electrical stress. Built around internal electronics housed in a lightweight composite shroud on a vibration-absorbing mount, the 3040 Automatic Antenna Tuner is fully waterproof and compliant to MIL-STD-810F for temperature, immersion, vibration, and dust. Integrated protection helps guard against open circuit, short circuit, over-voltage, over-temperature, voltage transients, and high VSWR.

LEARN MORE

FAST TUNING

New frequencies in one second average, memory tune in less than 150 ms with unlimited memory capacity.

POWER RATING

125 W PEP RF power handling for voice and data across the full 2 to 30 MHz band.

VSWR

Typically 1.5:1 or less into a 50 ohm system for efficient power transfer.

RECEIVER AMPLIFIER

Integral active wideband receiver amplifier improves scanning sensitivity across the HF band.

ALE COMPLIANT

Supports 2G and 3G ALE and Frequency Hopping, with transparent integration into Codan HF transceivers.

MIL-STD RUGGED

Fully waterproof and compliant to MIL-STD-810F for temperature, immersion, vibration, and dust. Designed to MIL-STD-461.

LOW PROFILE

Compact 147 x 167 x 240 mm form factor weighing 3.15 kg including spring and whip, on an M14 stud mount.

Memory channels Unlimited
Modes supported Receiver scanning, ALE (Automatic Link Establishment), data
ALE compliance 2G and 3G ALE and Frequency Hopping compliant
Receiver amplifier Integral active wideband receiver amplifier for scanning
Transceiver integration Fully integrated control interface with Codan HF transceivers
Frequency range 2.5 to 30 MHz (2.4 m, 7.9 ft whip); 2 to 12 MHz (3.5 m, 11.5 ft NVIS)
Power rating 125 W PEP (voice and data)
Input impedance 50 ohm
VSWR Typically 1.5:1 or less
Tuning speed New frequency 1 sec average, memory tune <150 ms
Temperature rating -30 degrees C (-22 degrees F) to 60 degrees C (140 degrees F), 95% humidity
DC operating range 11 to 15.5 V DC (12 V DC nominal)
Power consumption 0.4 A typical, less than 0.8 A typical while tuning
Protection Open circuit, short circuit, over voltage, over temperature, voltage transients, high VSWR
MIL-STD-810F Temperature, immersion, dust, vibration
MIL-STD-461 Designed to standard
Dimensions 147 W x 167 D x 240 H mm (5.8 x 6.6 x 9.4 in, excludes spring and whip)
Weight 3.15 kg (6.9 lbs) including spring and whip
Mounting M14 stud, 40 mm (1.6 in) long
Colour Black
MISSION OUTCOME

3040 Automatic Antenna Tuner gives mobile HF crews an automatic tuning whip antenna that keeps the channel ready as the mission moves. Across military vehicle fleets and commercial remote operations, a tuner that resolves a new frequency in one second average and rides out vibration, dust, and immersion keeps voice and data flowing when conditions turn hostile. Rated to 125 W PEP across the 2 to 30 MHz band and built to MIL-STD-810F, the 3040 Automatic Antenna Tuner is engineered to tune fast and stay on air.