Codan HF Ant SemiDelta PLD
Antennas & Masts HF Base Antennas and Tuners

Semi-Delta Antenna

BASE ANTENNA

The Semi-Delta Antenna is an economical broadband HF base station antenna covering 2 to 14 MHz with omni-directional coverage for short to medium distance NVIS and longer distance HF communications.

Book a Demo

Base stations need dependable HF coverage without unnecessary hardware. Semi-Delta Antenna operates across 2 to 14 MHz, connecting to the transceiver through a single coaxial cable. Its omni-directional pattern combines high and low angle radiation, supporting both NVIS and longer-distance communications from one practical base station solution.

HF sites need equipment that is quick to assemble and easy to connect. Supplied partially assembled, the antenna can be installed without special tools, with the feed point positioned at the lower end for straightforward cabling. Available accessories including coaxial cables, lightning protection, earth straps, and earth stakes help complete the base station fit-out.

Outdoor antenna systems must handle wind, weather, and long service life. Built from durable materials and rated for wind speeds up to 160 km/h with no ice, the antenna is designed for exposed base station environments. Power handling options support full duty cycle voice and data, giving teams a reliable HF link where space and budget are both under pressure.

LEARN MORE

2 TO 14 MHZ BROADBAND

Broadband HF coverage from 2 to 14 MHz with a nominal 50 ohm impedance and typical VSWR better than 2.5:1.

NO TUNER REQUIRED

Broadband design eliminates a separate antenna tuner unit; connects to the transceiver via a single coaxial cable.

OMNI-DIRECTIONAL

Omni-directional radiation combining high and low angle coverage for both NVIS and longer distance HF links.

FULL DUTY POWER

400 W PEP (240 W average) via UHF-type, or 1000 W (600 W average) via N-type, full duty cycle voice and data.

COMPACT FOOTPRINT

15 m and 1.5 to 2 m anchor points at 20 m spacing suit installations with limited space available.

FAST ASSEMBLY

Supplied partially assembled; built quickly without special tools, with the balun at the lower end for easy feed.

RUGGED OUTDOORS

Long service life materials with a 160 km/h wind rating (no ice) for harsh outdoor environments.

Product type Semi-Delta Antenna (broadband HF base station antenna)
Application Short to medium distance HF communications; NVIS and longer distance links
Radiation pattern Omni-directional, combining high and low angle radiation
Antenna tuner Not required; broadband design connects via single coaxial cable
Counterpoise Recommended for poor soil conductivity or non-conductive roof installations
Accessories RG58 or low loss RG213 coaxial cables; lightning protection; copper earth strap; earth stake
Frequency range 2 to 14 MHz
Power rating 400 W PEP (240 W average) or 1000 W (600 W average)
Nominal impedance 50 ohm
VSWR Typically < 2.5:1
RF connector type UHF-type (400 W); N-type (1000 W)
Duty cycle Full duty cycle voice and data at rated power levels
Mast heights 15 m mast and 1.5 to 2 m stub mast
Mast spacing 20 m
Balun mounting 2 x U-bolts to suit 50 mm diameter tube
Wind rating 160 km/h, no ice
Packed weight 8 kg (400 W); 11 kg (1000 W)
Packed dimensions 880 mm x 340 mm x 100 mm (excluding mast hardware)
Installation hardware Pulley/halyard suitable for a 15 m mast
MISSION OUTCOME

Semi-Delta Antenna delivers broadband HF coverage from 2 to 14 MHz with a typical VSWR better than 2.5:1 and omni-directional high and low angle radiation, supporting both NVIS and longer distance voice and data links without a separate antenna tuner. A compact footprint, fast tool-free assembly, a 160 km/h wind rating and power handling to 1000 W make this HF antenna a dependable base station choice where space and budget are tight. Backed by DTC engineering and worldwide service, the Semi-Delta Antenna keeps the net up wherever HF communications are deployed.