3049 HF Antenna Tuner
Antennas & Masts HF Base Antennas and Tuners

3049 HF Antenna Tuner

HF ANTENNA TUNER

A base station HF antenna tuner rated for 125 W PEP across the full 2 to 30 MHz band, matching end-fed long wire and base whip antennas for fixed station communications.

Book a Demo

Base stations relying on HF for long-haul links need an antenna tuner that holds a clean match through full duty cycle operation. Rated for 125 W RF power handling, the 3049 HF Antenna Tuner meets that standard. The 3049 Antenna Tuner Unit supports full duty cycle voice and data operation across the complete 2 to 30 MHz frequency band within rated environmental conditions. With unlimited memory capacity and the Codan proprietary fast tune interface, the 3049 delivers the initial tune in 6.7 seconds, and tunes from memory in under 200ms, The 3049 HF Antenna tuner holds up to the most demanding base station applications, keeping your teams connected when it matters most.

Installation teams configuring a base station antenna tuner need optionality that suits the site. Available in two variants, the 3049 HF Antenna Tuner is suitable for different installation scenarios. Drawing power from the connected Codan HF transceiver, the platform covers typical tuned base antenna types like the Codan Code 406 Whip and Code 403 Long Wire. The Interface Adaptor supports both Envoy and Sentry-H 6120-BM transceivers, letting the 3049 HF Antenna Tuner integrate into established Codan radio kits.

Fixed installations expose a HF antenna tuner to weather, sun, and temperature swings over years of service. The 3049 HF Antenna Tuner is built to withstand these conditions. A UV stabilised glass reinforced nylon housing with an IP67 ingress rating suits installation in both indoor and outdoor environments, with an optional sunshield accessory to protect from continuous sun exposure. Operating across -20 to 70 °C, the 3049 HF Antenna Tuner is robust by design and sustains reliable base station performance through the most demanding deployment conditions.

LEARN MORE

FREQUENCY RANGE

Transmits 2 to 30 MHz and receives 250 kHz to 30 MHz across the full HF band.

POWER RATING

Rated for 125 W PEP with 100 percent duty cycle in all modes up to 55 degrees C.

LOW VSWR

Peak VSWR at or below 1.8:1 and average at or below 1.2:1 into a 50 ohm system.

FAST MEMORY TUNE

Initial tune 6.7 second average, tune from memory under 200 ms on the 3049 variant.

ANTENNA RANGE

Tunes end-fed long wire and base whip elements from 2.4 m up to 23 m.

FLEXIBLE CABLING

30 m cables on the 3049 or single coaxial run up to 100 m on the 3049-S with Interface Adaptor.

WEATHER RATED

UV stabilised housing sealed to IP67 for indoor and outdoor base station installs.

Antenna length 2.4 m to 23 m
Duty cycle 100% all modes up to 55 degrees C
Memory channel Unlimited
Tune interface protocol Codan proprietary fast tune
Antenna / Ground connection M6 threaded stud
RF input / output (3049) 30 m RG58 flying lead coaxial cable terminated in UHF plug
RF input / output (3049-S) 200 mm RG58 flying lead coaxial cable terminated in N-type socket
Transceiver control (3049) 30 m fixed cable to standard Codan 6 pin circular plug
Compatible transceivers Envoy, Sentry-H 6120-BM
Compliance IEC 62368-1:2014, RoHS 3, CE EMC 2014/30/EU, FCC Part 15B, IC ICES-003, RCM CISPR32
Transmit frequency range 2 to 30 MHz
Receive frequency range 250 kHz to 30 MHz
RF power rating 125 W PEP
Tune power 20 W PEP
Input impedance 50 ohm
VSWR Peak at or below 1.8:1, average at or below 1.2:1
Tuning speed Initial tune 6.7 second average, tune from memory under 200 ms (3049) or under 500 ms (3049-S)
Dimensions 415 x 260 x 100 mm, tuner unit without cables
Weight 3.2 kg tuner unit without cables, 6 kg with 30 m cables
Housing material Glass reinforced nylon, UV stabilised
Colour Black
DC power requirements 12 V DC nominal, peak current 1.5 A, tuned state 800 mA maximum
Operating temperature range -20 to 70 degrees C
Storage temperature -20 to 70 degrees C
IP rating IP67 (tuner), IP42 (Interface Adaptor)
MISSION OUTCOME

3049 HF Antenna Tuner gives base station operators an HF antenna tuner that matches end-fed long wire and base whip antennas across the full 2 to 30 MHz band while holding average VSWR at or below 1.2:1. Across public safety fixed sites and commercial communications networks, dependable HF links can be the difference between coordination and isolation. Rated to 125 W PEP at full duty cycle, sealed to IP67, and offered with flexible cabling up to 100 m, the 3049 HF Antenna Tuner is designed to tune fast, hold the match, and keep base stations on air.