The 3046 HF Antenna Tuner is a low profile mobile HF antenna tuner rated for 150 W PEP across the full 2 to 30 MHz band, delivering high speed tuning of short and long whip antennas in the harshest environments.
Mobile teams need an efficient antenna match without delay. Using an advanced tuning algorithm, The 3046 HF Antenna Tuner matches new frequencies in under one second on average and recalls memory tunes in under 150 ms. With unlimited memory capacity, 150 W PEP handling, low VSWR, and an internal receive amplifier, it supports reliable voice, data, ALE, 3G ALE, and frequency hopping across the HF band.
Designed to work transparently with Codan Envoy and Sentry-H 6120-BM transceivers, the 3046 tuner keeps operator workload low. If a tuning issue occurs, the transceiver provides audible and visual alerts, with override capability for emergency use. Antenna options include a 3 m carbon fibre whip, 7 m extension and guy kit, NVIS configuration, and 9 m tactical long wire, giving teams flexibility across mobile and field profiles.
Field vehicles face dust, vibration, water, heat, and hard use. A high-strength lightweight alloy housing helps the tuner withstand demanding mobile conditions, with MIL-STD-810G compliance for dust and vibration and IP67 waterproof protection to 1 m. Built-in protection against open circuit, short circuit, over temperature, and high VSWR helps maintain performance when conditions are at their worst.
Covers the full 2 to 30 MHz HF band using 3 m or 7 m MIL spec whip or 9 m long wire antenna.
Rated for 150 W PEP, with 100 percent voice duty cycle up to 150 W across the operating range.
Typical VSWR at or below 1.5:1 into a 50 ohm system.
New frequency in under one second average and memory tune in under 150 ms.
High strength lightweight alloy housing meets MIL-STD-810G for dust and vibration, waterproof to 1 m.
Compact 340 by 210 by 95 mm package weighing just 2.4 kg for flexible mounting.
Supports a 3 m carbon fibre whip, 7 m extension, NVIS configuration, and 9 m tactical long wire.
| Modes | ALE, 3G ALE, and frequency hopping compatible |
|---|---|
| Memory channels | Unlimited, unique non-linear memory allocation |
| Receive amplifier | Internal receive mode amplifier |
| Protection | Open Circuit, Short Circuit, Over Temperature, High VSWR |
| Transceiver integration | Fully integrated with Codan Envoy and Sentry-H 6120-BM |
| RF connector | N-type socket |
| Control connector | 6-pin bayonet (MIL spec) |
| Antenna options | 3 m MIL spec whip, 7 m extension and guy kit, 9 m long wire kit |
| Frequency range | 2 to 30 MHz |
|---|---|
| Power rating | 150 W PEP |
| RF duty cycle | Voice 100% up to 150 W; Data 60% up to 125 W and 45% up to 150 W |
| Input impedance | 50 ohm |
| VSWR | Typical at or below 1.5:1 |
| Tuning speed | New frequency under 1 second average, memory tune under 150 ms |
| Dimensions | 340 L x 210 W x 95 mm H |
|---|---|
| Weight | 2.4 kg |
| Colour | White or olive drab green |
| Power consumption | Typically 400 mA, less than 0.8 A maximum |
| DC operating range | Codan transceiver (12 V nominal) |
| Temperature | -30 to +60 degrees C, 95% humidity |
| Environmental | MIL-STD-810G (Dust, Vibration), IP67 |
| EMC | Designed to MIL-STD-461 |
3046 HF Antenna Tuner equips mobile operators with a low profile HF antenna tuner that matches short and long whip antennas across the full 2 to 30 MHz band while holding typical VSWR at or below 1.5:1. Across military patrols and law enforcement field units, dependable HF communications can be the difference between coordination and isolation. Rated to 150 W PEP, sealed to IP67, and qualified to MIL-STD-810G for dust and vibration, the 3046 HF Antenna Tuner is designed to tune in under a second, radiate efficiently, and keep teams connected.