30W manpack HF radio. Less than 4.7 kg. 79 hours battery life. The Sentry-H 5110-MP is a rugged man-portable Software Defined Radio delivering long-range voice and data communications for field teams operating where no infrastructure exists.
Field teams need a radio that can adapt as requirements change. The Sentry-H 5110-MP is built on a proven software defined architecture, allowing new waveforms, standards, and capabilities to be added through software updates rather than hardware replacement. User-programmable power output in 1 W steps helps teams balance range, battery life, and operational profile across changing missions.
Operational networks often include a mix of older systems, current deployments, and partner organisations. The Sentry-H 5110-MP supports FED-STD-1045 ALE, 3G ALE, and Selcall, helping teams interoperate across legacy and modern HF networks. Digital voice, data modem options, IP connectivity, SprintChat, and SprintNet support messaging, email, file transfer, and mission-specific applications without adding unnecessary equipment.
Man-portable radios need to perform through heat, cold, humidity, and rough field handling. Qualified for operation from -30°C to +60°C with 95% relative humidity, the Sentry-H 5110-MP is built for demanding outdoor environments. Strong receive sensitivity, frequency stability across temperature extremes, and field-serviceable construction help maintain long-range HF links when teams are operating beyond terrestrial and satellite coverage.
User-programmable in 1W steps (low/medium/high) for range and battery optimization.
1.6 to 30 MHz transmit, 250 kHz to 30 MHz receive. Operates where terrestrial and satellite networks cannot.
Less than 4.7 kg with battery. Up to 79 hours battery life for extended field operations.
Field-tested SDR platform with tens of thousands of hours in operation, future-upgradable via software.
FED-STD-1045 ALE, 3G ALE, SELCALL. Fast linking and interoperability across legacy and current-generation networks.
TWELP/MELPe at 2400/1200 bit/s, plus optional 3G ALE data modem for SMS and custom IP data.
TPS-M programming software, USB flash drive, and IP connectivity for rapid configuration in the field without depot return.
| Frequency range (Tx) | 1.6 to 30 MHz (optional: 1.5 to 30 MHz) |
|---|---|
| Frequency range (Rx) | 250 kHz to 30 MHz |
| Power output | 30 W PEP ± 1 dB (two-tone or voice), user-programmable in 1W steps (low/medium/high) |
| Channels | Up to 1000 entries |
| Contacts | Up to 500 entries |
| HF networks | Up to 20 networks (simultaneous scanning) |
| Presets | Up to 100 user-defined presets |
| Input voltage | 13.8 V DC nominal, negative earth. Functional range: 10 V to 17 V DC |
| Frequency stability | ±0.3 ppm for -30°C to +60°C |
| Supply current (Tx) | Output power 30 W, two-tone 3 A to 4.5 A CW or average speech 1.5 A for battery life calculations |
| Supply current (Rx) | No signal <0.3 A typical, 0.35 A maximum |
| Programming | TPS-M Radio Programming Software, USB flash drive |
| Language support | English, Spanish, French, Arabic, Dari, Pashto, Portuguese, Polish |
| Compliance | UKCA, CE compliance available, FCC Part 90, AS/NZS 4770, AS/NZS 4355, IC RSS-125 |
| Modes | SSB USB, LSB (J3E), AM (H3E), CW (J2A), AFSK (J2B), FSK (F1B), ISB (B7D or B2B), Software Defined |
|---|---|
| Duty cycle | 100% voice and data |
| Receive sensitivity | SSB: -125 dBm (0.12 µV) for 10dB SINAD |
| Selectivity | >65 dB at -1 kHz and ±4 kHz SCF (USB) |
| Spurious/harmonic suppression | >65 dB below PEP |
| Intermodulation products | >31 dB below PEP |
| Digital voice | TWELP/MELPe at 2400/1200 bit/s |
| Standards | FED-STD-1045 ALE, 3G ALE, SELCALL |
| Dimensions | Radio with regular battery box: L: 324 mm x W: 245 mm x H: 96 mm (with handles) |
|---|---|
| Weight (without battery) | Radio with regular battery box: 3.23 kg |
| Weight (with battery) | Radio with regular battery box and 17.4 Ah battery: 4.65 kg |
| Battery life | Up to 79 hours with standard BB-2590 style battery |
| Interfaces | USB (front panel and Handset), GPS antenna, Ethernet via adaptor (TCP/IP, supports remote control) |
| Temperature range | Operational at -30 to +60°C; 95% RH maximum, non-condensing |
The Sentry-H 5110-MP delivers long-range voice, data, and secure communications on a man-portable manpack HF radio for field teams operating where no infrastructure exists. For public safety and commercial organisations requiring a software-defined radio with proven field reliability, interoperability across legacy networks, and uncompromised battery endurance, the Sentry-H 5110-MP holds the link when it matters most.