The 10m Premium Mast is a lightweight portable HF antenna mast standing 10 metres tall, supporting high power 1000 W broadband antennas for permanent and semi-permanent base stations.
Installed height of 10 metres (33 ft) on a lightweight aluminium structure weighing 18.5 kg with star pickets.
Robust construction supports high power 1000 W broadband antennas often required in HF networks.
Rated to 144 km/h (90 mph) wind speed in clear air as a standalone mast, subject to anchoring method.
Packs to 22 kg including tools at 213 x 37 x 15 cm for rapid air transport.
Top three guys carry rope tails and cleats so a two-person crew can deploy quickly and safely.
Carries 25W Manpack and 150 W PEP base antennas, plus 1000 W PEP Semi-delta and all TFD411 variants.
Supplied in raw aluminium or painted black to suit discreet or permanent installations.
| Mast type | Guyed portable HF antenna mast |
|---|---|
| Part number (Raw) | 15-60033 Mast, Guyed 10m, Premium (Raw) |
| Part number (Black) | 15-60034 Mast, Guyed 10m, Premium (Black) |
| Gibbet option | 15-60035 Gibbet, 10m Mast (required for TFD411 Inverted V configuration) |
| Compatible Manpack antennas | Broadband Dipole, Wire Dipole, Dipole and Broadband Kit, Long Wire, End-fed Broadband |
| Compatible base antennas | Semi-delta 125 W PEP, Semi-delta 1000 W PEP, TFD411 all variants, Tuned long wire |
| Antenna power support | High power 1000 W broadband antennas |
| Installation crew | Two-person crew |
| Specification | Not applicable for this product type |
|---|
| Installed height | 10 metres (33 ft) |
|---|---|
| Number of guys | 2 sets with 3 guy wires (terminated on guy discs) |
| Number of backstays | 1 (terminated on guy disc) |
| Guy radius | Minimum 5 m (16 ft) |
| Maximum wind speed | 144 km/h (90 mph) in clear air as a standalone mast, subject to anchoring method |
| Packed weight | 22 kg including tools (49 lbs) |
| Mast weight | 18.5 kg including star pickets (41 lbs) |
| Packed dimensions | 213 x 37 x 15 cm (7 x 1.2 x 0.5 ft) |
| Mast material | Lightweight aluminium |
| Guy material | Stainless steel wire rope with rope tails and cleats for top guy set |
| Installation hardware kit | 3 x star pickets, 7 x turnbuckles, 7 x D shackles, 4 x tent pegs, 1 x hammer, 5 x TEK screws, 14 x wire rope grips, 1 x 8 mm hex head nut driver, 1 x conductive grease |
| Mast finish | Raw aluminium or painted black |
10m Premium Mast raises HF wire antennas to 10 metres on a lightweight aluminium structure built to support high power 1000 W broadband antennas in demanding HF networks. Base stations gain a cost effective portable mast that a two-person crew can deploy quickly, with rope tails and cleats on the top guys for safe securing and a full tool kit included as standard. Plus, a packed weight of just 22 kg and a 144 km/h wind rating let the structure move by air and hold its load through rapid deployment and semi-permanent roles alike. From humanitarian relief stations to military HF base sites, the 10m Premium Mast carries the antenna estate that keeps networks on the air.